
Water Purification Supplies MB-2540-SW Sea Water RO Membrane 2.5" x 40"
Specifications & operating limits
- Nominal / minimum salt rejection: 99.6% / 99.3%
- Permeate flow: 600 GPD (2.3 m³/d), ±15%
- Active membrane area: 28 ft² (2.6 m²)
- Feed spacer: 28 mil
- Test conditions: 32,000 ppm NaCl, 800 psi (55 bar), 77 °F (25 °C), 8% recovery, pH 7 – 8
- Max. operating pressure: 1,000 psi (68.9 bar)
- Max. feed flow: 6.2 GPM
- Max. operating temperature: 113 °F (45 °C)
- Max. pressure drop per element: 15 psi (1.0 bar)
- pH range: 2 – 11 continuous, 1 – 13 during cleaning
- Feed free chlorine: <0.1 mg/L
- Max. feed SDI (15 min): 5
- Dimensions: length 40" (1016 mm), diameter 2.4" (61 mm), permeate tube OD 0.75" (19 mm), tube extension 1.19" (30.2 mm)
Salt rejection should be verified after 24 – 48 hours of continuous operation; results depend on feed water quality and operating conditions. Request a quote for current wholesale pricing and volume discounts.
Los precios se cotizan por teléfono o email, el mismo día hábil.

