English
Clack WS2HF 2" High Flow Valve For Softener And Filter

Clack WS2HF 2" High Flow Valve For Softener And Filter

Marca: Clack

  • Control Valve Flow Rates: Service 165 GPM Backwash 175 GPM
  • Epoxy coated lead free brass valve body
  • Fully programmable regeneration cycle times and sequences (maximum 9)
  • Network up to 16 valves using Cat5 cable or better
  • Methods to initiate regeneration: Meter Delayed, Meter Immediate, Time Clock Delay, Auxiliary Input, Modbus Initiated
  • Add up to 2 relay expansion boards to circuit board (sold separately)
  • Top-mount or side-mount capabilities for commercial and industrial applications
  • Programmable System types: Single, Alternating, Progressive Flow, Series
  • Day override feature; 1-28 days or 7 day
  • Blue backlight front display shows: Time and Date, Current Flow Rate, Volume Used, Volume Remaining, Days Remaining
  • Diagnostics and history viewing
  • Modbus RS485 duplex to communicate with building automation systems
  • On-Site circuit board software update capability
  • Reliable and proven DC drive
  • One piece expanding seal spacer stack assembly

Los precios se cotizan por teléfono o email, el mismo día hábil.

Especificaciones

General
Inlet/Outlet Fitting Connections2” Female NPT or BSPT
Cyclesup to 9
Valve MaterialLead free brass
RegenerationDownflow
Operating Pressures20 - 125 psi (1.4 - 8.6 bar)
Operating Temperatures40º - 110º F (4º - 43º C)
OptionsBackwash Filter
FLow rates
Service @15 psi drop125 GPM
Backwash @25 psi drop125 GPM
Cv Service32.3
Cv Backwash25.0
Tank applications
Water Softener18” - 63" diameter
Water Filter18” - 48" diameter
Dimensions & Weight
Distributor PilotValve Bodies with 2" Female NPT Inlet & Outlet - 2.375” OD (2" NPS) Valve Bodies with 2" Female BSPT Inlet & Outlet - 63mm OD
Drain Line2” Female NPT/BSPT/2.5” Groove Lock
Brine Line1” Male NPT elbow ¾” x 1” solvent weld elbow Optional Adapters - 1/2” or 5/8" OD Poly Tube Compression
Mounting Base4" - 8 UN, 6” Flange or Side Mount
Height From Top Of TankWith 4" - 8 UN QC Base - 11.5” (292mm) With 6" Flange QC Base - 11.6” (294.6mm)
Weight50 lbs (22.7 Kg)
Cycles of Operation Minutes
Backwash 1st (upflow)1 - 95
Regenerate Draw/Slow Rinse (downflow)1-180 / 1-95
Fast Rinse (downflow)1-95
Regenerant Refill in service with treated water0.1 - 99
Hold (service)1 - 480
Electrical Specifications All models excluding WS1.25SDUS Power SupplyInternational Power Supply
Supply Voltage120VAC240VAC
Supply Frequency60 Hz60 Hz
Output Voltage24VDC24VDC
Output Current800 mA800 mA

Accesorios y repuestos para este producto

Válvulas alternadoras Clack

Clack No Hard Water Bypass

Medidores de flujo Clack

Controles de flujo de drenaje Clack

Accesorios Clack para tanques y válvulas

Más accesorios

Más en Válvulas Clack

Ver todo: Válvulas Clack

¿Necesita un precio o ayuda para elegir una pieza?

Díganos el número de parte o qué necesita resolver. Respondemos en español e inglés y enviamos el mismo día desde Pembroke Park, Florida.