Select Page

FILTER AND WATER SOFTENER VALVE

Manual or multivalve valves for filter and Water Softener Valve

Manually operated valves also known as multivalves are usually used for small water purification systems. Being resistant, inexpensive and easy to install, they are one of the types of Water Softener Valve most used in water purification plants. They are also known as manual flow control valves.

Among the main applications of manual valves are the following:

-Equipment made of zeolite, sand, gravel, garnet, or some other filter medium.
-Small systems for water purifying plants.
-Residential softeners or softeners.
-Ion exchange equipment.
-Activated carbon purifiers.
-Industrial water treatment pre-treatment systems.
-Filtration equipment for swimming pools.

Manual valves:

In our product catalog we have manual or multivalve Water Softener Valve, which are ideal for equipment used in water purification plants and residential systems.

Water Softener Valve

MANUAL WATER VALVE FOR FILTER

Cycles: Service, Backwash, Rinse

Item PartV-FMSV-FMB
Flow26 gpm44 gpm
In/Out1” FNPT2” FNPT
Drain1” FNPT1.5” FNPT
Tank’s Head2.5”4”

Water Pressure: 20 – 85 psi

Water Temperature: 5 – 50 ºC (41-122 ºF)

automatic water valve

AUTOMATIC WATER VALVE FOR FILTER

Cycles: Service, Backwash, Rinse

Item Part: V-FES

Flow: 17 gpm

In/Out/Drain: 1” FNPT

Riser pipe: 1.05” OD

Tank’s Head: 2.5”

Transformer output: 12 VDC, 1.5 A

Water Pressure: 20 – 85 psi

Water Temperature: 5 – 45 ºC (41-113 ºF)

MANUAL WATER VALVE FOR SOFTENER

Cycles: Service, Regeneration, Fast Rinse, Brine

Refill

Down-flow regeneration

Item PartV-SMSV-SMB
Flow17 gpm44 gpm
In/Out1” FNPT2” FNPT
Drain½” NPT1” NPT
Brain connection⅜”½”
Riser pipe1.05” OD1.5”
Tank’s Head2.5”4”

Water Pressure: 20 – 85 psi
Water Temperature: 5 – 45 ºC (41-113 ºF)

water softener bypass valve

AUTOMATIC WATER VALVE FOR SOFTENER

Cycles: Service, Regeneration, Fast Rinse, Brine

Refill

Down-flow regeneration

Item PartV-SESV-SES-M
Typeby Timewith Meter
By-passNOYES
Flow9 gpm9 gpm
In/Out¾” FNPT¾” FNPT
Drain½” NPT½” NPT
Brain connection ⅜”⅜”
Tank’s Head2.5”2.5”

Transformer output: 12 VDC, 1.5 A
Water Pressure: 20 – 85 psi
Water Temperature: 5 – 45 ºC (41-113 ºF)

IN – OUT HEAD

For tanks with 2.5” head opening

Thread: ¾” FNPT

Automatic Water Level Control Valve

The Automatic Water Level Control Valve measures the amount of water that passes through the mineral tank into your home. The valve has a meter that controls the volume of water that is fed into the mineral tank. As the hard water flows through the mineral tank, the resin beads exchange their sodium ions for hardness ions.

Over time, this reduces the ability of the resin to continue to effectively soften the water. Before the balls are too loaded with mineral content to continue removing calcium and magnesium ions, the control valve automatically starts a regeneration cycle.

The maximum load capacity of the resin balls is pre-programmed into the computer inside the control valve and is based on a variety of factors, such as the size of your house, the number of members and the hardness of the water.

Please your order by fax (954-322-6699), email or phone:

954-322-6666

All orders are processed same day